Chemical Machining & Etching Services

Titanium Photochemical Machining

At Tecomet Inc., we produce precision titanium components through photochemical machining. Our titanium etching services give design engineers and sourcing teams burr-free parts with no heat-affected zones, for prototype runs and high-volume production alike

Titanium Photo Etching for Medical and Aerospace Parts

Titanium resists corrosion and remains biocompatible in the body. It also offers a high strength-to-weight ratio. Those properties make titanium a common choice for implantable devices and aerospace hardware, yet they also make it hard to cut and form with conventional tooling.

Titanium photo chemical etching solves that problem by removing metal with acid rather than cutting force. Tools don't wear down, and the part never experiences heat or mechanical stress. We coat the titanium with photoresist and expose the pattern using a precision photo tool. Acid then removes the unprotected metal, and we strip and rinse each part. Because the same photo tool repeats your design throughout the run, part-to-part consistency is maintained across every project.

Titanium Etching Capabilities

We etch titanium foils and sheets, so ultra-thin material and heavier stock fit our process. Our engineers apply an etch allowance to the photo tool so finished dimensions match your print. Our capabilities include:

  • Thickness range of 0.0001" to 0.100"
  • Burr-free edges with no heat-affected zones
  • Precision photo tools on mylar or glass
  • Clean room production with automated visual inspection
  • Cost-effective runs from prototype quantities to high volume

Available ASTM Titanium Grades
  • Grade 1
  • Grade 2
  • Grade 3
  • Grade 4
  • Grade 5
Common Titanium Products
Advantages of Titanium
  • Biocompatible
  • Corrosion Resistance
  • High Strength-to-Weight Ratio
Industries
  • Medical
  • Aerospace

Available Titanium Grades

We etch ASTM titanium in Grades 1 through 5. Grades 1 through 4 are commercially pure titanium, and each step up trades formability for strength. Grade 5 is the Ti-6Al-4V alloy, which offers higher strength than any commercially pure grade. Send us the grade your drawing calls for, and we will etch to that specification.

Titanium Parts We Etch

Our titanium etching services produce parts for engineers who need tight, repeatable features in a biocompatible or lightweight metal. Common titanium products include:

Why Engineers Choose Photochemical Machining for Titanium

Stamping presses add mechanical stress to thin titanium and leave burrs that need secondary deburring. Laser cutting introduces heat, leaving a heat-affected zone along the cut edge. Titanium photo etching avoids both problems. The metal comes off by chemical action alone, so the finished edge carries no burr or thermal damage.

Photo tools are artwork rather than hard dies, so a design revision means a new photo tool instead of a new stamping die. That makes our titanium photo etching services a practical fit for prototypes and pilot builds, as well as for full production.

Design Titanium Parts for Photochemical Etching

Feature size in etching depends on material thickness, so thinner titanium yields finer detail. If your design calls for tight openings in heavier stock, talk with our engineers before you finalize the print. We can suggest a thickness or feature adjustment to keep your part manufacturable and your quote accurate. Sharing the part's end use helps us recommend the right grade and thickness.

Titanium Etching Services by Industry

Titanium etching serves design engineers and buyers in medical, aerospace, and industrial programs, and we tailor each run to the way those teams use the metal.

Medical

We manufacture titanium medical parts in a clean room environment. Implantable devices and spinal components benefit from edges that come off the etching line burr-free. Maxillofacial mesh and drug delivery devices gain the same advantage. We have earned a reputation for manufacturing medical components and devices that meet or exceed industry expectations.

Industrial

Titanium screen filters and mesh resist corrosion in demanding service. Photochemical machining lets us hold fine, repeatable openings across an entire sheet. Industrial customers also order titanium shims and bonding discs from us when a design needs a flat, corrosion-resistant part with clean edges.

Quality Built Into Titanium Etching

We hold ISO 9001:2015 and ISO 13485:2016 certifications and use automated visual inspection to check titanium parts as they move through production. Our engineers review each print before tooling starts, which gives you a clear answer on what the process can offer before you commit to a run.

Frequently Asked Questions About Titanium Etching Services

Can you half-etch or single-side etch titanium parts?

We offer single-step half-etching, which removes metal partway through the thickness to create a recess or a thinned area. One-sided etching is possible within thickness and material limits. Multi-step etching has restrictions, so send us your print and our engineers will confirm what works for your titanium part.

What finishing steps can you add after etching titanium?

We offer several secondary operations, including heat treatment and electropolishing. Which of these fits your titanium part depends on the grade and end use, so ask our engineers early.

How long does titanium etching take?

Our lead time is typically two weeks or less. We also offer expedited service with one-week and three-day options. Confirm the timeline for your part when you request a quote.

 

To learn more about our photo chemical etching of titanium parts capabilities, contact Tecomet Etch today! We are an ISO 9001:2015 certified company.

 

Click here to Request A Quote